The connection of the windings of the source and phases of the receiver with a star with a neutral wire

Lecture




(four-wire network)
  The connection of the windings of the source and phases of the receiver with a star with a neutral wire
The points n and N are connected, therefore the potential of the point n is 0.

  The connection of the windings of the source and phases of the receiver with a star with a neutral wire

The phase voltages of the receiver are equal to the phase voltage of the generator, i.e.

  The connection of the windings of the source and phases of the receiver with a star with a neutral wire

respectively, linear voltages are also equal. Thus, two voltages are applied to the receiver connected by a star: phase and linear, and the phase current is equal to the linear property of the series connection   The connection of the windings of the source and phases of the receiver with a star with a neutral wire .

Symmetric and unbalanced load

With a symmetrical load when

  The connection of the windings of the source and phases of the receiver with a star with a neutral wire

Unbalanced load

  The connection of the windings of the source and phases of the receiver with a star with a neutral wire

Currents at asymmetrical and symmetrical load

The mode of each phase does not depend on the mode of the other two phases - the current is determined by the parameters of the receiver of this phase, i.e.

  The connection of the windings of the source and phases of the receiver with a star with a neutral wire

The current in the neutral wire is equal to the sum of the phase currents according to the 1st Kirchhoff's law:

  The connection of the windings of the source and phases of the receiver with a star with a neutral wire

A four-wire connection is used for an asymmetrical load, since when the operation of one phase changes, the modes of the other phases will not change, because neutral wire provides constant phase voltages.
The currents in the phases have the same magnitude and are phase shifted relative to the corresponding phase voltages by the same angle φ, i.e. form a symmetric three-phase vector system on the complex plane.

Currents with symmetrical load.

According to the 1st Kirchhoff law with a symmetrical load:

  The connection of the windings of the source and phases of the receiver with a star with a neutral wire


Comments


To leave a comment
If you have any suggestion, idea, thanks or comment, feel free to write. We really value feedback and are glad to hear your opinion.
To reply

Electrical Engineering, Circuit design

Terms: Electrical Engineering, Circuit design